LVC2G157DCU3 解码器、多路复用器、信号开关 VFSOP8/US8 标记57CZ
| 逻辑类型Logic Type | |
| 电路数Number of Circuits | |
| 输入数Number of Inputs | |
| 电源电压VccVoltage - Supply | |
| 静态电流IqCurrent - Quiescent (Max) | 单电源 Single Supply |
| 输出高，低电平电流Current - Output High, Low | 1.65 V ~ 5.5 V |
| 低逻辑电平Logic Level - Low | This single 2-line to 1-line data selector/multiplexer is designed for 1.65-V to 5.5-V VCC operation.The SN74LVC2G157 features a common strobe (G) input. When the strobe is high, Y is low and Y is high.When the strobe is low, a single bit is selected from one of two sources and is routed to the outputs. The device provides true and complementary data.NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down. Available in the Texas Instruments Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 6 ns at 3.3 V Low Power Consumption, 10-µA Max ICC ±24-mA Output Drive at 3.3 V Typical VOLP(Output Ground Bounce)<0.8 V at VCC= 3.3 V, TA= 25°C |
| 高逻辑电平Logic Level - High | 这个单-2线1线数据选择器/多路复用器专为1.65-V到5.5 V的VCC操作。SN74LVC2G157拥有一个共同的选通信号（G）输入。当选通信号高，Y是低和Y是高。当选通信号为低电平时，从两个来源之一选择一个单个位，被路由到输出。该器件提供真正的和互补的数据。 NanoFreeTM包装技术是IC包装概念的重大突破，使用冲模作为封装。这个装置是完全指定的部分断电应用程序使用IOFF。当断电时，IOFF电路关闭输出，防止破坏回流电流通过设备。 支持5-V VCC操作 接受输入电压到5.5 V 最大TPD为6 ns，在3.3 V时 低功耗，10μA最大ICC ±24 mA输出驱动，在3.3 V时 典型的VOLP（输出地弹跳）<0.8 V，在VCC=3.3 V，TA= 25°C时 |
| 传播延迟时间@Vcc，CLMax Propagation Delay @ V, Max CL | |
| Description & Applications | |
| 描述与应用 |
| 规格书PDF |
