集成电路IC 模拟开关 74LVCV2G66DC SOT-383 marking/标记 Y66
开关配置Circuit | 2*单刀单掷 2*SPST |
导通电阻On-State Resistance | 10Ω/Ohm |
电源电压Voltage - Supply | 2.3 V ~ 5.5 V |
Description & Applications | Bilateral switch a low-power, low-voltage, high-speed Si-gate CMOS device. Each switch includes an overvoltage tolerant input/output terminal (pin nZ), an output/input terminal (pin nY) and low-power active HIGH enable input (pin nE). The overvoltage tolerant switch terminals allow the switching of signals in excess of VCC. The low-power enable input eliminates the necessity of using current limiting resistors in portable applications when using control logic signals much lower than VCC. These inputs are also overvoltage tolerant. 5 V tolerant input for interfacing with 5 V logic High noise immunity Switch handling capability of 32 mA CMOS low-power consumption Latch-up performance exceeds 250 mA Incorporates overvoltage tolerant analog switch technology Switch accepts voltages up to 5.5 V independent of VCC |
描述与应用 | 双边开关 低功耗,低电压,高速硅栅CMOS器件。 每个开关包括过压容限输入/输出端(引脚NZ),输入/输出 终端(针NY)和低功耗主动高启动输入(引脚NE)。 的过压容限开关端子允许超过的VCC的信号的切换。 的低功耗的使能输入消除了使用的电流的限流电阻的必要性 便携式应用中使用时,控制逻辑信号远远低于VCC。这些输入 也过压容限。5 V宽容输入与5 V逻辑接口 高抗干扰 切换处理能力为32毫安 CMOS低功耗 闭锁性能超过250 mA 内置过压容限模拟开关技术 开关接受电压高达5.5 V独立的VCC |
规格书PDF |